Main Subjects = Energy ,Fuels
Number of Articles: 51
Vacuum Drying Characteristics of Some Vegetables

Volume 30, Issue 4, December 2011, Pages 97-105

10.30492/ijcce.2011.6120

Esmaeil Zakipour; Zohreh Hamidi

Physical Properties of Green Pea in an Inert Medium FBD Dryer Assisted by IR Heating

Volume 30, Issue 1, March 2011, Pages 107-118

10.30492/ijcce.2011.6363

Bijan Honarvar; Dariush Mowla; Ali Akbar Safekori

CFD Study on Hydrogen-Air Premixed Combustion in a Micro Scale Chamber

Volume 29, Issue 4, December 2010, Pages 161-172

10.30492/ijcce.2010.6419

Sayed Reza Shabanian; Masoud Rahimi; Abbas Khoshhal; Ammar Abdulaziz Alsairafi

CFD Modeling Study of High Temperature and Low Oxygen Content Exhaust Gases Combustion Furnaces

Volume 29, Issue 2, June 2010, Pages 85-104

10.30492/ijcce.2010.6706

Kiomars Abbasi Khazaei; Ali Asghar Hamidi; Masoud Rahimi

Experimental and Numerical Analysis of Flow and Heat Transfer in a Gas-Liquid Thermosyphon Heat Exchanger in a Pilot Plant

Volume 29, Issue 2, June 2010, Pages 121-129

10.30492/ijcce.2010.6708

Hassan Zare Aliabadi; Hossein Atashy; Seyed Hossein Noie; Mohamad Khoshnoodi; Mohammad Khorram; Mohammad Khoshvaght

Simulation of Boiling in a Vertical Channel Using Ensemble Average Model

Volume 28, Issue 3, September 2009, Pages 61-70

10.30492/ijcce.2009.6848

Hikmet S. Aybar; Mohsen Sharifpur

Experimental Investigation on Hydrodynamic and Thermal Performance of a Gas-Liquid Thermosyphon Heat Exchanger in a Pilot Plant

Volume 27, Issue 3, September 2008, Pages 115-126

10.30492/ijcce.2008.6975

Hassan Zare Aliabadi; Hossein Atashi; Seyed Hossein Noie; Mohammad Khoshnoodi

Experimental Investigation in Pool Boiling Heat Transfer of Pure/Binary Mixtures and Heat Transfer Correlations

Volume 27, Issue 3, September 2008, Pages 135-150

10.30492/ijcce.2008.6979

Sayed Ali Alavi Fazel; Mohammad Jamialahmadi; Ali Akbar Safekordi

Parametric Study of Operation and Performance of a PEM Fuel Cell Using Numerical Method

Volume 27, Issue 2, June 2008, Pages 1-12

10.30492/ijcce.2008.6925

Mehdi Seddiq; Hassan Khaleghi; Masaud Mirzaei

Investigation of Auto Ignition Condition under Different Parameters

Volume 27, Issue 2, June 2008, Pages 93-101

10.30492/ijcce.2008.7002

Samaneh Razzaghi; Riyaz Kharrat; Davood Rashtchian; Shapour Vossoughi; Soheil Saraji

Numerical Modelling of Porous Radiant Burners Using Full and Reduced Kinetics Mechanisms

Volume 27, Issue 1, March 2008, Pages 53-63

10.30492/ijcce.2008.7012

Mostafa Khosravy El-Hossaini; Mehdi Maerefat; Kiumars Mazaheri

Diagnosis of Heat Exchanger Scales in Cooling Water Systems

Volume 27, Issue 1, March 2008, Pages 65-72

10.30492/ijcce.2008.7013

Mohammad Kameli; Naser Esmaeili; Hossein Rahimi Mofrad

Studies on Soot Formation and Combustion in Turbulent Spray Flames: Modeling and Experimental Measurement

Volume 26, Issue 3, September 2007, Pages 45-54

10.30492/ijcce.2007.7630

Kazem Bashirnezhad; Mohammad Moghiman; Iman Zahmatkesh

Software Development for Simulation of Reformer Furnace

Volume 25, Issue 4, December 2006, Pages 55-71

10.30492/ijcce.2006.8033

Akbar Zamaniyan; Ali Taghi Zoghi

Experimental Survey on Microwave Drying of Porous Media

Volume 24, Issue 2, June 2005, Pages 1-10

10.30492/ijcce.2005.7789

Akbar Khodaparast Haghi; Hossein Ghanadzadeh; Daniel Rondot

Generalization of Decomposed Integration Methods for Cost Effective Heat Exchanger Networks with Multiple Cost Laws

Volume 24, Issue 1, March 2005, Pages 7-19

10.30492/ijcce.2005.8127

Mohammad Hassan Panjeh Shahi; Majid Amidpour; Hossein Ahmadi Danesh

Numerical Prediction of Temperature Distribution in Transient RTM Process

Volume 23, Issue 2, December 2004, Pages 25-32

10.30492/ijcce.2004.8135

Mohammad Reza Shahnazari; Abbas Abbasi; Majid Soltani

Bed Voidage and Heat Transfer in Non-Newtonian Liquid-Solid Fluidized Bed

Volume 23, Issue 2, December 2004, Pages 73-79

10.30492/ijcce.2004.8141

Mohammad Reza Ehsani; Hasan Behbahani; Mohammad Jamialahmadi

Modeling and Simulation of a Side-Port Regenerative Glass Furnace

Volume 23, Issue 2, December 2004, Pages 81-88

10.30492/ijcce.2004.8142

M. H. Hamzeh; Sayed Mojtaba Sadrameli

Cost Effective Heat Exchanger Network Design with Mixed Materials of Construction

Volume 23, Issue 2, December 2004, Pages 89-100

10.30492/ijcce.2004.8143

Mahmood Reza Hojjati; Mohammad Reza Omidkhah; Mohammad Hassan Panjeh Shahi

Heat and Mass Transfer in Leather Drying Process

Volume 23, Issue 1, April 2004, Pages 25-34

10.30492/ijcce.2004.8157

Akbar K.Haghi; D. Rondot

Heat Transfer of Liquid/ Solid Fluidized Beds for Newtonian and Non-Newtonian Fluids

Volume 23, Issue 1, April 2004, Pages 119-130

10.30492/ijcce.2004.8170

Masoud Aghajani; H. Müller Steinhagen; Mohammad Jamialahmadi

Iranian Journal of Chemistry and Chemical Engineering

Journal Archive